Flash Sale 🎉 Prime-Line Garage Door Torsion Spring, 0.250 in. x 2 in. x 32 in., Green, Left Hand Wind 👏

This is a left hand wind torsion spring. In recent years most doors are being supplied with torsion springs located directly above the door and mounted to the header. Replacement will require the use of 2 winding rods, sold separately. To wind the torsion spring correctly you will need a clear understanding of wire size and handing. It is always best to replace both springs at the same time.

• Used by a variety of garage door manufacturers
• 0.250 in. wire size x 2 in. inside dimension x 32 in. length with White color code
• When dual spring installations are involved, it is important to correctly install both the LEFT & RIGHT WIND SPRINGS during the same job
• Spring includes stationary & winding cones. Replacement requires use/purchase of Prime-Line part GD-52238 and a clear understanding of wire size and handing
• Left hand wind springs are mounted to the right of center (as viewed from the inside the garage looking out)
• Left hand wind, 2 in. inside diameter
• Matching left hand wind Torsion spring is Prime-Line part GD 12234
• For further dimensional information, please see the line drawing